While unshielded cables are much cheaper, the signal quality decreases through electrical noise. Shielded cables come with braided or foil shielding, which is usually made of copper or another conductive polymer. Shielding reduces electrical noise and improves connection quality. Straight-through cables, often known as patch cables, are used to connect different types of devices.
For example, a computer to a router. Crossover cables are used to connect two devices of the same kind, for example, connecting two computers. Solid cables are generally used for business networks and offer a slightly better service than stranded. They consist of a single run of wire. They cheaper to produce, and so are often much more affordable than their stranded counterparts. Stranded cables contain a few smaller wires which work together.
Most patch cables are stranded cables. Stranded cables are more robust in terms of breakage. They are better suited for home use. Ethernet cables come in different variations, known as Categories or Cat. Each category refers to a different set of standards. As the standards change over time, new categories are created.
Currently, the lowest recommended standard available is Cat5. Anything under that is now obsolete. As internet speeds get faster, Cat5 cables are heading towards becoming obsolete too. Category 5 Cat5 — an older form of Ethernet cable and enables speeds of up to Mbps.
Megabits per second. Category 5e Cat5e — an updated version of Cat5 and allows for faster speeds with reduces interference from electrical cables. Category 6 Cat6 — enables speeds of up to 10 gigabits, depending on the area. Cat6 cable has thin wires, which helps in terms of its signal to noise ratio. The cables are stiffer than Cat5 cables, which can make them harder to run around tight corners. Category 6a Cat6 — an improved version of the Cat6 cable.
It enables speeds of up to 10 gigabits. The cables offer double the bandwidth than the Cat6s too. More often then not, Cat6 cables are often shielded to reduce electrical noise and electromagnetic radiation from affecting the signals. Category 7 Cat7 — Offering up to 10Gbps Gigabits per second up to a metre distance. Cat 7 twisted cables must be fully-shielded, which will eliminate crosstalk and improve electrical noise resistance. Need just a little more help in the right direction?
Equipment Connect a Cable modem with an Ethernet connection. Summary This article provides information on how to connect a cable modem with an Ethernet connection. Connect one end of the coaxial cable to the cable wall outlet. Connect the other end of the coaxial cable to the cable modem. Ethernet cables connect devices such as PCs, routers, and switches within a local area network. These physical cables are limited by length and durability.
If a network cable is too long or of poor quality, it won't carry a good network signal. These limits are one reason there are different types of Ethernet cables that are optimized to perform certain tasks in specific situations. An Ethernet cable resembles a traditional phone cable but is larger and has more wires.
Both cables share a similar shape and plug, but an Ethernet cable has eight wires, while phone cables have four. Ethernet cable connectors are also larger. Ethernet cables come in many different colors, but phone cables are usually grey. Ethernet cables plug into Ethernet ports , which are larger than phone cable ports. An Ethernet port on a computer is accessible through the Ethernet card on the motherboard.
This port is usually on the back of a desktop computer, or on the side of a laptop. Ethernet cables support one or more industry standards including Category 5 and Category 6. Because of this, many online stores that sell network cables use this abbreviated language as well.
Ethernet cables are manufactured in two basic forms:. A crossover cable is a type of Ethernet cable that connects two computers to each other. By contrast, most Ethernet cables connect one computer to a router or switch. A single Ethernet cable has a maximum distance capacity, meaning the cable has an upper limit as to how long it can be before there is a signal loss called attenuation.
This problem results because the electrical resistance of a long cable affects performance. Acquire an Ethernet cable. You'll use an Ethernet cable to connect your computer to your router. The cable connecting your modem and your router is an Ethernet cable, but don't use that one, as it is important where it is. Make sure your router is online. If you just have a modem, simply make sure that it's attached to the Cable or Ethernet port in your wall. Locate Ethernet ports on your computer and router.
Ethernet ports are square, and they usually have an icon depicting a series of connected boxes near them. If you're just connecting to a modem, the port you need will usually say "Internet" or "WAN" above it.
Plug your Ethernet cable into your computer and your router. As long as your router is online, doing so will connect your computer to the Internet almost immediately. Method 2. Open the Start menu. It's in the bottom-left side of the Start window. It's in the top row of options here. Click Ethernet. This option is on the left side of the window. Verify that the Ethernet is working. You should see your Internet's network name at the top of this page with "Connected" written below it; this indicates that your Ethernet connection is live.
If your Ethernet isn't working, try using a different port on the router or a different Ethernet cable. Method 3. Open the Apple Menu.
To do so, click the apple-shaped icon in the top-left corner of the screen. Click System Preferences. You'll see this option in the Apple Menu drop-down window. Click Network. This will open the Network window.
0コメント